Apologies for the delay in getting this ready folks, the past two months have been one helluva ride!
It’s time to announce the winners of October’s #DeltaDefJam and in a first for any of the film parties to date, we have a tie for first place.
Voting was tighter than any past party, with second, third and fourth place tied by a single vote each – almost too close to call.
So, without further ado, here’s the roll call from third to first place.
Ashley B Williams – @Grumpyfck
Day 3 #2 Mamiya c330
Delta 100, DD-X 1:6.
@DeltaDefJam #DeltaDefJam #52cameras52weeks @SoperfectImages #believeinfilm
Stephen S – @fresnel10
Mmmmore neon. Took Enoch tries to get a good photo of this sign. @ILFORDPhoto Delta 100 & Canon A1. #DeltaDefJam
Joint 1st place
Claudio Gomboli and Adi W were voted by you into joint first place for their submissions on the 16th and 17th of October respectively. Here they are, with some words about the photographs they created:
Claudio Gomboli – @gomboli
…and it’s also @DeltaDefJam time!
Day 1, Nikon F3 50mm, @ILFORDPhoto Delta 3200 + red filter.
Adi W – @adiw1202
“Day turning into night”- the view from the 70th floor. #ilfordfilm Delta 100 with #Heliar 15mm. #DeltaDefJam #IlfordPhoto #believeinfilm #LosAngeles @ILFORDPhoto @DeltaDefJam
I took that shot from the OUE Skyspace Observation Deck in Downtown Los Angeles. It’s located on the 70th floor of the US Bank Tower. I was shooting my Voigtlander Bessa R2A with a Voigtlander Heliar Ultra-wide 15mm, handheld on ILFORD Delta 100 Professional
The film was developed in Ilfotec DD-X at a dilution of 9+1 and scanned using SilverFast Version 8 on an old Epson 4870 scanner.
Congratulations to Ashley, Stephen, Claudio, Adi and everyone else who joined in for October’s party. The shortlist for Novembers event will be ready this week, so please keep your eyes peeled!
Thanks again and see you all soon.
Write for EMULSIVE
The driving force behind EMULSIVE is knowledge transfer, specifically creating more of it in the film photography community. You can help by contributing your thoughts, work and ideas to inspire others reading these pages.
Take action and help drive an open, collaborative community: all you need do is read this and then drop me a line.
Lend your support
Like what you see here? You can support EMULSIVE by helping to contribute to the community voice on this website (see above), or by heading on over to the EMULSIVE Patreon page and adding financial support from as little as $2 a month.
As if that’s not enough, there’s also an EMULSIVE print and apparel store over at Society 6, currently showcasing over two dozen t-shirt designs and over a dozen unique prints of photographs made by yours truly.