You may recall the scene below from Rear Window (1954). Jimmy Stewart is fervently seated in a wheelchair, using an Exacta camera and massive telephoto lens, Jimmy is photographing scenes from the rear window of a neighboring building. He fears a murder occurred.
Note the name (Exakta/Exacta on some models) is covered in black tape on Jimmy’s camera. Unless Jimmy is a freak of nature – and from the ergonomics of the camera – taking a sharp image in this pose is bordering on impossible.
You see, the shutter button is behind his right thumb.
Onto this beautiful but maddening camera. My Exakta, the Exacta VAREX IIb to be precise, was built in East Germany between 1963 and 1967. The company, Ihagee, began in Dresden in the mid 1930’s and was a pioneer of SLR manufacturing. The company did not manufacture lenses for this interchangeable lens system camera, however.
Exacta mount lenses were manufactured by Zeiss, Meyer Optik, Steinhill, Schneider, Vivitar and similar legendary manufacturers. A sought-after Exacta lens is the Meyer Optik 100mm f/2.8, the famed Trioplan. It is revered for its unique soap bubble bokeh and like other Exacta mount lenses, is often used today on modern cameras with an adapter.
The camera is an ergonomic nightmare (see use of the self-timer described below), and the camera manual is a riddle inside of a riddle. But damn, I adore it! It is a marvel of precision and the most beautiful camera I have seen.
Here’s what’s covered in this article:
Table of contents
Looking at the top of the camera moving from right to left:
The large right dial serves a number of functions. It acts as a self-timer and as the slower (below 1/30th of a second) shutter speed dial.
Timed exposures of up to 12 seconds can be set using this dial. To use these features requires Exacta-mad steps. For self-timed exposures of 1/30th and above set the speed using the shutter speed dial on the left side of the camera then lift the ring around the right dial and set it to a red speed setting.
Turn the right dial all the way until it stops. Press the shutter. To set speeds below 1/30th of a second set the main speed dial to T or B then follow the same process as above to set the slow speed.
Moving left you will see the view from the waist level finder. The viewfinder on my model is clear and bright. There is a pop-up magnifier to fine-tune focus. There is also an eye-level prism finder discussed below.
Continuing left is the “fast” shutter speed dial, allowing one to set shutter speeds from 1/30th to 1/1000th of a second in single-stop increments. To set your desired speed, align the chosen speed with the small black dot. The shutter speed can be set before or after the shutter is cocked.
The post at the bottom left of the shutter speed dial is the film rewind button. In true Exacta fashion it must be held down while the film is rewound (more on this later).
The film advance lever is on the left side of the camera and has 300 degrees of forward travel. If the shutter functions properly it will return to position automatically.
Finally for the top panel, the lower left corner is where you will find the exposure counter. The counter must be reset to 1 manually after loading.
On the right had side of the bottom plate is the film winding lever. Film rewinding requires another Exacta gymnastic exercise. The film rewind post on the top left of the camera must be held down to disengage the shutter.
The rewind wheel will not engage unless the lever is unfolded – very Germanic!
To the bottom left of the rewind lever is a screw mechanism, which engages a film cutting knife. Unscrew it and then pull the shaft towards to cut the film mid-roll. It has a sharp point and the knife remains sharp to this day.
In the center of the rear plate is a standard 1/4″ tripod mount screw.
Finally, on the left of the bottom plate is the wheel used to open the film door. Mine was stuck and a small bit of oil resolved things. Pull the wheel out and turn it counter-clockwise. When it locks into place and the back can be opened.
Nothing eventful happens on the back of the camera. Regardless of if the waist-level, or eye-level finder is mounted, the shutter must be cocked in order for the scene to appear in the viewfinder – there is no automatic mirror return. The viewfinder is bright and clear and shows 100% of the scene.
With the film door opened, you will see a sprung pressure plate on the door (right). There are three chrome nubs that help to keep the film flat.
The film canister is loaded on the right of the film bay. It passes left to a take up spool, which is held onto its post by way of a small sprung ball bearing. The spool can be removed to insert the film leader, then reinstalled and held in place by the ball bearing. Clever.
Just to the right is the cutting knife I mentioned in the previous section. Be careful putting your fingers near it, it has a sharp point and the knife is razor sharp.
Mounted on the camera in these pictures is a beautiful 35mm Carl Zeiss Flektogon F2.8 lens. As you see, the shutter button is on the left side of the lens (and in fact, forms part of the lens assembly). Being right handed I am having trouble with this feature.
The shutter can be locked-out by turning the turning the knurled mechanism that surrounds the shutter button anti-clockwise.
The lens mounted on my camera at the time of purchase was a 50mm Zeiss Panacolor F/2.8 lens. It suffered from very stiff focusing and the focusing ring’s knurled grip had come loose. The stiff focus shows in the sample photos below taken with this lens. The mounted 35mm lens you see here is buttery smooth and razor sharp. It does the Zeiss name proud.
When the on-lens shutter button is pressed, it engages the body’s shutter release. On my copy, the shutter button on the camera body was sticking intermittently at all speeds. I put a small drop of oil into the button and it fixed the problem perfectly. The camera fires and resets fine now.
Finally, the front of the camera also provides three PC flash ports, M, F and X (medium, fast and xenon).
My impressions on the Exakta VAREX IIb
If you are a lover of vintage cameras I highly recommend the Exacta line. Several cameras in the line have shutter speeds to 1/1000 sec. That is why I opted for this particular model.
It is a beautiful camera; well-engineered and precise. Its ergonomics are very difficult with the shutter button on the left, so much so that my plan is to use a shutter release cord for right-handed firing. If you are left-handed you may like it. It is quirky but in a good way.
One will be hard pressed to find a more beautiful camera. It is well engineered and precise. Several cameras in the line have shutter speeds to 1000 and in fact, that is why I opted for this particular model.
Being on 50 years old, the purchase of this camera comes with risk. A common problem is deterioration of the shutter curtain. My copy shows some wrinkling in the second curtain (before the shutter is cocked). There is a bit of wear on the curtain that becomes visible after the shutter is cocked. Many complain of curtains resembling swiss cheese. I haven’t had any issues with spotting or light leaks from my curtain but replacement is inevitable.
Service on the cameras is difficult and self-service will be a chore. There is not much in the way of repair literature available. I have found a few technicians in the USA that will CLA an Exacta but this (with a shutter curtain replacement ), will cost up to $300. I only paid $75 for the camera and original lens! The end-result at $375US is a marvellous innovative vintage camera performing as intended.
The Exacta is heavy, akin to the Nikon F and F2. Mine came with its original metal camera strap. Beware of this strap, mine broke and luckily I caught the camera before it fell to the ground. The weight works well for neck-strapped waist level shooting.
Shutter speeds may not be accurate but my exposures indicate speeds are satisfactory.
Despite the quirks what matters is image quality. Zeiss lenses available for this line are very good and inexpensive (subject to condition). With readily available adapters these lenses can be mounted on digital cameras. A 58mm Zeiss Biotar in good shape costs about $90USD and the outstanding wide Zeiss Flektagon lens is available for ~$50USD.
The 100mm Meyer Optic Trioplan is a legendary exacta mount lens fetching high prices due to its great image quality and soap bubble bokeh. The lenses suffer from dried lubricants and separation due to age and lack of use. Inquire about condition, especially focus stiffness if buying sight unseen.
Exacta Varex IIb technical specifications
|Camera name||Exacta Varex IIb
(US-martket: Exakta VXIIb)
|Camera type||Interchangeable lens SLR|
|Lens mount||Unified Exacta mount (EXA + Varex IIa)
44.7mm flange distance
|Lenses||2400+ covering 12-2000mm|
|Viewfinder||Pentaprism / waist level finder
100% coverage (alleged)
|Shutter||Mechanical horizontal focal plane
12 sec - 1/1000th sec
Mirror lock-up (slow modes)
Shutter release includes cable release thread
|ISO / ASA||N/A|
|Flash||3x 2-pin flash PC sockets:
(M, F and X)
|Wind / Rewind||Single stroke - 300 degrees
Screw-lock film back
Manual frame counter reset
|Finish||Silver with black leatherette|
|Weight||~580g excluding lens|
(WxDxH - mm)
|Accessories||Waist level finder
Eye level finder
Write for EMULSIVE
EMULSIVE is all about promoting knowledge transfer across the film photography community. You can help by contributing your thoughts, work and ideas to inspire others reading these pages: check out the submission guide.
If you like what you're reading you can help this passion project by heading on over to the EMULSIVE Patreon page. There's also print and apparel over at Society 6, currently showcasing over two dozen t-shirt designs and over a dozen unique photographs available for purchase.