EMULSIVE | Jun 5, 2018 | 9
Medium format first timer: Kodak 120 film and the Hasselblad 500C/M – by Rick Davy
I’ve wanted to get into the medium format aspect of photography for some time now but the timing aspect hasn’t really been there if I’m honest, that was up until now.
I’ve admired several medium format cameras from afar but when the time to make that purchase there was only one clear choice, the Hasselbald 500CM. I’m of the opinion I reckon that when Victor Hasselblad set about designing the 500, aesthetics and the design came first and practically came second. Lets face it, its a design icon.
Prior to purchasing my CM I set about looking for 120 film at my local car boot sales and charity shops – a couple of killer places to look for expired film and sometimes on the odd occasion, up to date rolls.
So, armed with two rolls of expired film, firstly a roll of Kodacolor X (expired 1970) and secondly a roll of Portra 400NC (expired 2006) I rolled them off. As you will no doubt be aware, you never really know what to expect from expired film, that’s the risk you take.
There’s another element to this little project of mine, grabbing the light readings etc. I dont have a light meter nor have I ever used one. So bearing in mind that the CM is a full manual camera, I chose to gauge my light reading via my Leica M6. I set the ISO at 800 and really enjoyed the first experience of hand cranking my films and selecting the subjects at will.
When it came to processing the films I used AG Photolab. Unfortunately, due to my processing inexperience I was unaware that the Kodacolor-X film process, i.e. C22, was no long available but the guys at AG offered to hand process it in black and white. Disappointing really when I’d shot the subject matter with colour in mind but I guess not the end of the world.
Finding the camera was relative easy to a degree. Finding a good quality one at a reasonable market price took me somewhat longer. Eventually a found a very good example on eBay. Buying a camera on-line can be a risk but the rapport I struck up with the seller gave me the piece of mind I needed. For me, the camera’s condition was everything and this one was by far the best I’d managed to find.
What did I pay? £800. My view was that it represented really good value.
First impressions on delivery were just what I expected on the build quality front but I was shocked by the sheer weight of it. However, as I began to use it that clearly wasn’t an issue. Focusing was a different experience as I’ve never shot at waist level before but I soon managed that.
What I think I love most about the camera was the sound of the shutter opening and closing. A real thud and very engaging.
I think if you bear in mind that using expired film will always give mixed results. Sometimes good, sometimes not so good. Thats the risk. The results on the Kodacolor-X roll was not so good. Only two shots came out on the whole roll. Both very average. It appeared from the negatives that the rest of the roll had been fully exposed somehow. Not down to me or the camera but more no doubt more likely to its lifetime storage conditions.
(Click or tap on the thumbnails below to view them in glorious full screen!)
On a positive note, the roll of Portra was bang on. I love the grain, the colour tones and the overall finish. I did expect more clarity if Im honest but I reckon thats only down to me and will no doubt improve the more time I spend with my CM.
Write for EMULSIVE
The driving force behind EMULSIVE is knowledge transfer, specifically creating more of it in the film photography community. You can help by contributing your thoughts, work and ideas to inspire others reading these pages.
Take action and help drive an open, collaborative community: all you need do is read this and then drop me a line.
Lend your support
Like what you see here? You can support EMULSIVE by helping to contribute to the community voice on this website (see above), or by heading on over to the EMULSIVE Patreon page and considering financial support from as little as $2 a month.
As if that’s not enough, there’s also an EMULSIVE print and apparel store over at Society 6, currently showcasing over two dozen t-shirt designs and over a dozen unique prints of photographs made by yours truly
In short, I want to continue building this platform and I’d love your help to make that happen.