It’s Kodak Portra’s 20th anniversary and we’re here to celebrate! Kodak Portra was originally brought to market back in 1998 in the form of Portra 160VC, 160NC, 400VC and 400NC, the films were replaced with upgraded versions in 2010 (Portra 400) and 2011 (Portra 160); and were joined by an all-new, high speed emulsion, Portra 800, which is still the fastest colour negative film available for purchase today.

It’s been a while since the last film party – the judges and I were happy to take a much-needed break after 18 months of back to back parties but there was no way we could let such a milestone by without even a little fuss, so here we are: welcome to #PortraParty 2018!

For this celebration, we decided to follow the format set by 2017’s SummerFilmParty and an equally simple premise in three parts:

  1. Shoot a roll or sheet of any one of the variants of current or legacy Kodak Portra during “Shoot Week” in August, September and October 2018 and share your gear and location using the #PortraParty hashtag and by tagging @PortraParty.
  2. If you’re developing your own film, share shots of your darkroom or negs during each “Dev Week” – making sure you tag as above.
  3. Go mad and share your shots with the community during each month’s “Post Week“, once again tagging #PortraParty and @PortraParty on Twitter. Please also make sure you tag your submissions for entry into one – and only one! – of the following categories: #Landscape, #Streetlife, #Abstract / #FunkyAF, #Home, #Macro / #CloseUp – further details below.

It’s as simple as that. The judges and I will collect the best images submitted during each shoot week and feature them right here on EMULSIVE for all to see.

As with the previous film parties, the shortlist will be open to a public vote, with the best submission being the one which receives the most community votes.

Here’s the roster for the next two months:

August 2018
Shoot week: 6th – 12th
Dev week: 13th – 19th
Post week: 20th – 26th

September 2018
Shoot week: 3rd – 9th
Dev week: 10th – 16th
Post week: 17th – 23rd

October 2018
Shoot week 1st – 7th
Dev week: 10th -16th
Post week: 17th – 23rd

 

 

Permitted film/media types

Limited to Kodak Portra, whether it be:

New Portra: 160, 400 or 800.

Original Portra: 160NC/VC, 400NC/VC, 100T, 400BW and any other Portra film I’m not aware of.

 

 

Event categories

As part of the judging process each month, we’ll be looking for the best submissions that reflect each category of the following categories. It’s up to you to include one of the following as hashtags in your posts. No double tagging please (it gets confusing). If you’re not 100% sure about which category your photo fits, just read the descriptions below. We’ll take care of any tough ones.

The categories are:

#Landscape
Nature or urban scenes, it’s up to you

#Streetlife
It’s up to you to include people and or architecture

#Abstract / #FunkyAF
No poultry unless absolutely necessary,

#Home
Shooting indoors or gearing up for a Kitchen Battle, this is for you

#Macro / #CloseUp
Anything as close as your lens will allow

 

That’s really it. We’ll have more updates once the first party is up and away in about three weeks but for the meantime all that’s left to say is that Myself, Diz and Shawn are all looking forward to seeing you at the party!

~ EMULSIVE

 

PS. If “film photography” isn’t your thing, the PrintParteh folks over on Twitter are running a from August 5th to September 3rd, so there’s that to think about, especially while the sun is still out (thinking about all you folks in the UK 😉 )

 

 

Write for EMULSIVE

The driving force behind EMULSIVE is knowledge transfer, specifically creating more of it in the film photography community. You can help by contributing your thoughts, work and ideas to inspire others reading these pages.

Take action and help drive an open, collaborative community: all you need do is read this and then drop me a line.

 

Lend your support

Like what you see here? You can support EMULSIVE by helping to contribute to the community voice on this website (see above), or by heading on over to the EMULSIVE Patreon page and adding financial support from as little as $2 a month.

As if that’s not enough, there’s also an EMULSIVE print and apparel store over at Society 6, currently showcasing over two dozen t-shirt designs and over a dozen unique prints of photographs made by yours truly.

7 COMMENTS

  1. The event looks fine but on twitter!? Come on guys, instagram should be much better and most of the people who shoot photos have an account there.

Add your voice

This site uses Akismet to reduce spam. Learn how your comment data is processed.