My ILFORD FP4 PLUS development times article seemed to cause quite a buzz. Mostly around the topic of “why would you even try to shoot this film at EI 6400?!”
I’m not really one for standing still and with that in mind, I’ve decided to publish my personal development times for Kodak’s Tri-X 400 from EI 200 all the way up to EI 25600. As with the times published in the ILFORD FP4 PLUS article, the tables below show both real world tested and untested (extrapolated) development times for this film.
The times listed below may not work for everyone (differences in water quality/hardness/softness, agitation schemes, etc.), however I’ve yet to hear back that any of them were anything other than a success – here’s keeping fingers crossed.
The times below with EI 400 as the base speed (N). All other times vary from that as N+/- in full or fractions of stops
Ready? Here we go.
Kodak Tri-X 400 development times – EI 400
|Exposure (EI)||Pull/Push||Developer||Dilution||Temp (°C / °F)||Agitation||Time|
|400||N||Rodinal||1+50||21C / 70F||Semi-stand (30 min)||50:00|
|400||N||Kodak HC-110||1+19 (C)||21C / 70F||1st min + 5 secs each min||02:45|
|400||N||Kodak HC-110||1+39 (D)||21C / 70F||1st min + 5 secs each min||05:00|
|400||N||Kodak HC-110||1+79 (F)||23C / 73F||1st min + 5 secs each min||07:45|
Kodak Tri-X 400 – Rodinal 1:50 – EI 200-3200 – 21C / 70F
Kodak HC-110 – 1+19 (Dilution C) – EI 200-6400 – 21C / 70F
Kodak HC-110 – 1+39 (Dilution D) – EI 200-6400 – 21C / 70F
Kodak HC-110 – 1+79 (Dilution F) – EI 200-25600 – 23C / 73F
Have your say
Are there any times you were looking for not listed here? Just leave a note in the comments and I’ll update the article. The same goes for developer combinations.
Which film would you like to see next? Leave a note below and I’ll see what I can do.
Write for EMULSIVE
EMULSIVE is all about promoting knowledge transfer across the film photography community. You can help by contributing your thoughts, work and ideas to inspire others reading these pages: check out the submission guide.
If you like what you're reading you can help this passion project by heading on over to the EMULSIVE Patreon page. There's also print and apparel over at Society 6, currently showcasing over two dozen t-shirt designs and over a dozen unique photographs available for purchase.