5 Frames With… Kodak Portra 400 (EI 400 / 120 / Zero Image 2000 6×6) – by Daphne Schnitzer
These pictures were all captured with my Zero Image 2000 6×6 pinhole camera on Kodak Portra 400 film. This setup is currently competing with my other favorite, a 3d-printed Flyer 6×6 pinhole camera loaded with Ektar 100.
Both cameras captured almost all of the images in my pinhole seascapes book, Vues sur mer. In the book, I use a number of series of four images, each series taken with the same camera on the same roll, to emphasize tiny color gradation and subtle cloud formation movement. The progression of the images throughout the book simulates the passing of a single summer day from morning to dusk. The present selection includes more recent pinhole seascapes from the same locations.
The Zero Image 2000 is so small and lightweight that it usually comes in my bag wherever I go, and since all paths seem to lead me eventually to two favorite hounds, namely the promenade near the old Yafo harbor and the new Tel-Aviv harbor, that is where it will perform its magic, in daytime or more often at dusk, on a gorillapod or, most often, just perched on a rolled up sweater on rock or ramp. With Portra film and its very forgiving exposure latitude I hardly have to meter the exposures any more, which is part of the pleasure in using it with a pinhole camera.
Instead I will usually shoot the same scape with my Lomo automat camera on Instax mini (or with the folding 6×6 lens camera, used much like a pinhole with a lens!) while the pinhole camera is at work, and later compare the results. In truth, it is not really an attempt to “exhaust” a place or subject that motivates my series of images, but a fascination with the endless variety of light and shapes that the “same” seascape offers from day to day.
Or does it amount to the same thing? Regardless, welcome to my 5 Frames With 🙂
~ Daphne Schnitzer
Write for EMULSIVE
The driving force behind EMULSIVE is knowledge transfer, specifically creating more of it in the film photography community. You can help by contributing your thoughts, work and ideas to inspire others reading these pages.
Take action and help drive an open, collaborative community: all you need do is read this and then drop me a line.
Lend your support
Like what you see here? You can support EMULSIVE by helping to contribute to the community voice on this website (see above), or by heading on over to the EMULSIVE Patreon page and considering financial support from as little as $2 a month.
As if that’s not enough, there’s also an EMULSIVE print and apparel store over at Society 6, currently showcasing over two dozen t-shirt designs and over a dozen unique prints of photographs made by yours truly
In short, I want to continue building this platform and I’d love your help to make that happen.