Mention 6x6cm medium format film cameras to a photographer and most will immediately think Hasselblad. Mention Rolleiflex to the same group and they will almost certainly think of the well-respected range of twin lens reflex (TLR) cameras. I’ll let you into a secret: until 6 months ago I’d have given you the same response.
I first became aware of the Rolleiflex SL66 by reading ‘Elements’ by the late Barry Thornton. The impact of Barry’s black and white photographs and his description of the various benefits had me hooked. The SL66 was a relatively late arrival on the medium format SLR scene, being launched in 1966, compared with rival Hasselblad, which was launched to the public back in 1948.
It’s a little-known fact that Rollei commenced development of their own SLR in 1955. However, in 1957 Rollei’s Reinhold Heidecke and Hasselblad’s Victor Hasselblad, entered into an agreement ensuring that Rollei would not produce SLR cameras in return for Hasselblad not producing TLR cameras. After Heidecke’s death in 1960, development was slowly re-started and the SL66 was officially launched at 1966’s Photokina fair in Cologne.
Production of the SL66 in its original form continued up until March 1986, with a total of 28,900 cameras having been made. The camera’s successor (the SL66SE) continued being mass produced until 1992; and special editions continued to be produced into the early 2000’s.
I purchased my SL66 complete with 80mm f/2.8 lens, for £850 in 2018. In this article, I will give you a run through of the camera’s functions and features, along with my impression of what it’s like to use and a few images I’ve made with the camera. Here’s what I cover:
SL66 – Front
On the front of the camera is the shutter release just below the lens on the left-hand side. The shutter release has a collar which is turned to lock the shutter release and prevent accidental exposures. It also incorporates a standard cable release thread.
Below the lens (not visible) is a catch which allows the lens to be removed from the body
SL66 – Left
On the left-hand side is the camera’s large focusing knob, which is surrounded by a depth of field scale. The focusing scale is adjusted for different focal length lenses. You can see it set for 80mm in the image above. Tucked away under the focusing knob are the camera’s flash sockets.
The smaller knob below is the release for the front tilt feature, with the flash shoe above it. At the very front of the camera is the depth of field preview button.
SL66 – Right
The right-hand side of the camera has the film advance crank with the shutter speed selector around it. The double exposure switch is concealed behind the crank and can be accessed when it is unfolded (shown above).
Advance crank on the film back is the knob to advance the film to the first frame when loading, and to wind the film through after the last exposure. Above that is the exposure counter and below it the latch for the film back.
SL66 – Top
On top of the camera is the Waist Level Viewfinder. The viewfinder screen has an engraved grid and a split screen. A built-in magnifier is provided for fine focusing.
My camera came with an 80mm f/2.8 Carl Zeiss Planar lens. This was the standard lens supplied with the SL66 and is equivalent to a 50mm in 35mm terms. The Carl Zeiss range of lenses was very well-respected, and this lens is, without doubt, the sharpest of all the lenses I possess, either for a digital or analogue camera.
All of the original lenses for the SL66, which ranged from 30mm up to 100mm were made by Zeiss, although later lenses were made by other manufacturers. The 80mm is a good general all round lens, but I have since added a 150mm f/4 Zeiss Sonar to use for abstract work.
The SL66 comes with some features, which as far as I know, are unique amongst medium format cameras.
You might be interested in...
Apart from large format cameras and TLRs, most cameras achieve focus using a focusing helicoid system, where elements of the lens are moved forward or backwards. With the SL66, the entire lens is moved using bellows between the lens and the main body.
In essence, this is the same method as used by large format cameras and allows extremely close focusing to be achieved. For example, the 80mm lens can be focused at any point from infinity down to 16cm without any adaptors.
The bellows focusing also allows the lens to be tilted to achieve maximum front to rear focussing without having to resort to special lenses. As I also use large format film cameras where this future is standard, this was a major advantage over a Hasselblad when I was looking for a 6×6 camera.
Rolleiflex supplied a separate focusing scale with the camera which allowed the required degree of tilt to be calculated using the Scheimpflug Rule, but so far, the use of these has escaped me and I just focus in the viewfinder as I would with my field cameras. A maximum of 8 degrees of tilt, either up or down, is available
“Retro” lens fitting
The simplicity of the camera and the use of a focal plane shutter enables the lens to be fitted to the camera back-to-front or in “retro” mode. This enables the lens to be used as a macro lens. The degree of magnification is given on a scale alongside the bellows. Using this feature, the 80mm lens can focus down to 12cm, at which point it will yield a magnification of 1.6x.
In common with medium format SLRs including Mamiyas, Bronicas and Hasselblads, the film is loaded into an insert which fits into a removable film back/magazine. However, the Rollei’s mechanism seems to be the Achilles heel of this camera. Internet forums are full of tales of jammed backs, or even jammed cameras, due to problems with the film back, so I am always very careful loading and unloading the camera.
The images above show the four basic steps of loading a Rolleiflex SL66 film back:
- The film back opens to the rear after releasing the catch on the top.
- The film magazine is then removed from the film back.
- The film is then loaded into the magazine. Unlike many other medium format SLR cameras, there is no need to line up the start arrow.
- The magazine re-inserted into the film back. After closing the back, the film is wound forward and automatically stops at the first frame.
The SL66 in use
The first thing to note about the SL66 is the weight. At just over 2kg, it weighs almost half a kilo more than the rival Hasselblad. Although it could be used at waist height with a strap around the neck – and indeed Rolleiflex supplied an optional hand grip – I think the camera really lends itself to tripod mounting.
As originally manufactured, there is no built-in metering. Rolleiflex later supplied a metered prism, but as the shutter is mechanical this didn’t permit any degree of automation. This means that the use of a separate meter is almost essential unless you want to trust to the ‘sunny sixteen’ rule.
As I’m predominantly a landscape photographer, none of the above limit my use of the camera, although the weight precludes carrying it long distances. Focusing the camera is simple, thanks to the bright viewfinder. Even when stopped down to working aperture the image remains bright. Using the tilt to its maximum extent allows superb front to back focus to be achieved, even at medium apertures, and coupled with the high resolution of the lens gives images which can rival those made on large format view cameras.
With the camera having bellows focusing, you must remember to add exposure compensation once the lens to film distance exceeds a certain distance, but there are handy apps available these days which de-mystify that aspect.
The images of my work were made on ILFORD FP4 PLUS. And developed in Ilfotec DD-X. I expose the film at EI 64 rather than the box speed of 125 to capture shadow detail and develop for 20% less than the recommended time for the box speed.
Summary and Conclusions
If you want a lightweight medium format camera, then this definitely isn’t the camera for you. However, if you want a 6×6 camera capable of producing images of exceptional quality, and you are prepared to put up with some quirks, then this is the camera for you.
The SL66’s additional features like tilt front and close-up focusing give you something which other similar cameras don’t have. The only down sides I have found are the weight and the fact that any accessories are both hard to find and command a premium compared to Hasselblad.
Rolleiflex SL66 specifications
|Camera name||Rolleiflex SL66|
|Camera type||Single Lens Reflex|
120/220 rollfilm (12/24 pictures)
|Manufacturer||Werkstatt für Feinmechanik und Optik, Franke & Heidecke (1920-1972)
Rollei-Werke Franke & Heidecke GmbH (1972-1979)
Rollei-Werke Franke & Heidecke GmbH & Co. KG (1979-1981)
Rollei Fototechnic GmbH & Co. KG (1981-2004)
Rollei GmbH (2004-2015)
Rollei GmbH & Co. KG (2015-Present)
|Manufacture dates||1966-1986 - SL66
1982-1986 - SL66E
1982-1992 - SL66X
1986-1992 - SL66SE
|Shutter||Mechanical focal plane: B, 1 sec - 1/1000 sec
In-lens Synchro Compur (some lenses)
Carl Zeiss (Jena),
30mm - 1000mm
|Focusing||Fresnel matte screen. Centred microprism with a fine focusing collar.|
Remote control power winder
Sheet film and instant film backs
|Metering||Metered prism (uncoupled)|
|Flash||2x PC sockets: X and FP; Flash sync below 1/30 sec.
Flash sync across all speeds when using lenses with built-in Compur shutters.
|Power||1.3V PX625 mercury cells (discontinued)
1.55V Silver Oxide with PX625 converter
|Weight||2kg (appx with 80mm lens and film back)|
|W156 x H110 x L172mm (body, 80mm lens and finder)|
Share your knowledge, story or project
The transfer of knowledge across the film photography community is the heart of EMULSIVE. You can add your support by contributing your thoughts, work, experiences and ideas to inspire the hundreds of thousands of people who read these pages each month. Check out the submission guide here.
If you like what you're reading you can also help this passion project by heading over to the EMULSIVE Patreon page and contributing as little as a dollar a month. There's also print and apparel over at Society 6, currently showcasing over two dozen t-shirt designs and over a dozen unique photographs available for purchase.