Some time ago I combined two new-for-me techniques in one batch of the film developing process – semi-stand and processing C-41 film in B&W chemistry. What prompted me to develop color negative Kodak Ektar 100 film with black and white chemistry, you ask? I have no idea, maybe a desire to experiment with film.
This roll of Kodak Ektar 100 was exposed more than a year ago and waited for attention in my fridge. Until recently time I used local lab service for developing color film (slides and negatives), but the last time I used them, two my color 120 rolls exposed in Ethiopia were spoiled by the lab so. I was now a little bit nervous because of this situation where I have no ability to interfere and to take control of the process and I don’t develop color film at home.
The process of this developing was very simple – actually the same as B&W negative developing. During the way of my “home education”, I learned to be very accurate with temperature, measures, and attentiveness in agitation. More then this – I decided to make it a semi-stand process – one hour of developing that can help to achieve the better tonal range and confidence that this long process will be less aggressive to the foreign emulsion.
The result I got was dirty and grimy – I read about in forums when I did homework about this (not) native process, but somewhere inside me was a hope for a miracle… And a miracle happened when I started the scanning process. You can see the results below – clean and crisp, sharp and well-toned scans of five frames (actually all 12 frames turned out very well in terms of photography and in terms of developing.
As I said, I’m always trying to be very accurate and exact during my stand (or semi-stand) developing processes. Well, it took some time to get used to and bring to perfection all stages. The stable (always 20°C) temperature of all parts of the process. I always put the tank during the long stand aspect in a pot filled with 18-19°C water and checked it from time to time.
A few words about photography gear, soup and times I used.
- Hasselblad 500CM with Planar 80mm f/2.8 lens.
- Expired Kodak Ektar color negative 120 film.
- 2 minutes of soaking in a clean 20C water.
- 1+100 Rodinal (one shoot) developer – one hour with one turn in the middle.
- One minute agitation in a clean 20C water.
- 8 min of fixing in Agfa Fix-AG 1+7.
- 2 minutes of the wetting agent at the end.
Thanks for reading,
Submit your 5 Frames... today
Get your own 5 Frames featured by submitting your article using this form or by sending an email via the contact link at the top of the page.
Share your knowledge, story or project
The transfer of knowledge across the film photography community is the heart of EMULSIVE. You can add your support by contributing your thoughts, work, experiences and ideas to inspire the hundreds of thousands of people who read these pages each month. Check out the submission guide here.
If you like what you're reading you can also help this passion project by heading over to the EMULSIVE Patreon page and contributing as little as a dollar a month. There's also print and apparel over at Society 6, currently showcasing over two dozen t-shirt designs and over a dozen unique photographs available for purchase.