I’d like to introduce you to Grouchy the TRASHcam.
Grouchy began life as a standard steel trash can from Home Depot but it wasn’t long before it became obvious to me that Grouchy had character and was too good for normal trash duties. So, after a bit of planning, I set about giving him a start in life normally reserved for those Ivy League wine boxes.
Grouchy was to become a Trashcan Camera, or TrashCam.
I began by customizing him with a coat or two of new interior paint (black, naturally). Next came three handmade artisanal pinhole apertures, approximately f/500 each. They’re made from cinefoil and mounted (taped) to the inside of the camera body behind bigger holes.
Placement for the lenses was 12 inches from Grouchy’s bottom plate, with 8 inches of spacing between. For the shutters, I constructed an incredibly complex system of three pieces of electrical tape. For convenience, each shutter is operable manually and independently of the other two.
Finally, I added a Weatherstrip light seal to Grouchy’s rim, just below his lid.
You’ll notice his favorite subject is other dumpsters and bins.
Grouchy’s maximum image area is 22×32 inches…typically less. Normal deployment in the field is two sheets of 16×20 photographic paper placed side by side in a portrait orientation. The paper is positioned and held in place by several micro magnets.
His focal length is 20 inches and a typical daylight exposure for photographic paper (with a nominal EI of 6) is between 10-15 minutes – plenty of time to go make a sandwich or complete a couple of levels of my favorite mobile game, Candy Crush Saga.
His original design was created by my friend and pinhole master David Ellis. My modification is the three pinhole feature.
There’s not much more to say about Grouchy. The images speak for themselves. He’s proof again that film photography has very little in the way of boundaries and exemplifies the true appeal of analog; fun, interesting, weird, stupid, cheap. Digital got nothin.
With the information supplied here, hopefully you’ll soon be welcoming a Grouchy of your very own into your family.
Happy modding and enjoy the samples and full specification below:
|Format||Variable. Full frame up to 22 x 32 inches|
|Manufacturer||Unknown. User modified.|
|Manufacture dates||Whenever you have the time.|
|Viewfinder coverage||None. Had an arrow on the top which has now worn out.|
Stepless speeds from 1 sec - forever
|Lenses||3 apertures, each approximately f500
Fixed 20 inch focal length
|Accessories||Optional stickers and paint.
Optional bungie cord security system.
|Flash||If you must|
|Power||Requires good upper body strength|
|Body and lid:
26 inches tall
20 inch diameter
Write for EMULSIVE
The driving force behind EMULSIVE is knowledge transfer, specifically creating more of it in the film photography community. You can help by contributing your thoughts, work and ideas to inspire others reading these pages.
Take action and help drive an open, collaborative community: all you need do is read this and then drop me a line.
Lend your support
Like what you see here? You can support EMULSIVE by helping to contribute to the community voice on this website (see above), or by heading on over to the EMULSIVE Patreon page and adding financial support from as little as $2 a month.
As if that’s not enough, there’s also an EMULSIVE print and apparel store over at Society 6, currently showcasing over two dozen t-shirt designs and over a dozen unique prints of photographs made by yours truly.