EMULSIVE | Aug 8, 2018 | 5
5 Frames With… Harman Direct Positive Paper (EI 2 / 4X5 / INTREPID) – by Phil Harrison
I was recently reading Daphne Schnitzer’s interview and one of the many materials she uses is Harman Direct Positive Paper (DPP). This material sounded like it was just what I was looking for, so I had to give the 4×5 version a go in my Intrepid 4×5 field camera.
Harman DPP is an orthochromatic fibre-based reversal paper with a glossy surface, it can be processed under red light in PQ Universal or Multigrade developer and Rapid Fixer. DPP’s ISO is between 1 and 3, and test prints needed to be made to set up my exposure meter. Prints are positive and horizontally flipped (mirror), any lettering is back to front.
Harman’s Technical Information sheet goes into great lengths about pre-flashing the paper before exposure to reduce contrast, not a method I am able to employ. It’s most enjoyable to set up the bedroom as a darkroom and process the paper.
I bought some small developing trays, chemicals, and have refurbished an old Paterson red safelight. Harman recommends developing for the full time of 3 minutes in PQ Universal and rapid fixing for 1 minute. Once processed, washed and dried, the sheets curl quite badly so are flattened overnight under a copy of the ‘Magnum Contact Sheets’ book, it’s a very heavy tome!
Once flat, I can easily scan the DPP’s and flip the image if necessary.
The garden image was my initial test shot, trial exposures were at f/22, 1 sec, 2 secs, 4 secs, the best print being 2 secs, the meter was calibrated from this exposure.Exposure is still a bit touch and go, I do a few different exposures if I’m uncertain of the lighting. The paper is contrasty, so diffused lighting is recommended, although I’ve had good results in bright sunlight, it has a high definition and is grain free.
Harman Direct Positive Paper is a fun medium and doesn’t break the bank, it is also ideal for helping me get more large format experience. There is something about the originals that I find fascinating, it’s almost like getting a somewhat delayed Polaroid print. I’ve framed some of the best.
Write for EMULSIVE
The driving force behind EMULSIVE is knowledge transfer, specifically creating more of it in the film photography community. You can help by contributing your thoughts, work and ideas to inspire others reading these pages.
Take action and help drive an open, collaborative community: all you need do is read this and then drop me a line.
Lend your support
Like what you see here? You can support EMULSIVE by helping to contribute to the community voice on this website (see above), or by heading on over to the EMULSIVE Patreon page and considering financial support from as little as $2 a month.
As if that’s not enough, there’s also an EMULSIVE print and apparel store over at Society 6, currently showcasing over two dozen t-shirt designs and over a dozen unique prints of photographs made by yours truly
In short, I want to continue building this platform and I’d love your help to make that happen.