Building a naked Aero Ektar Speed Graphic: The AEROgraphic project part...

This is the first of a six-part series in which I will describe the process of creating a naked Graflex Pacemaker Speed Graphic 4x5...

How to shoot Instax Square in an Instax Wide camera (free...

When we talk about instant film, Fujifilm and Polaroid Originals are the only mature solutions available at this time. One of the characteristics of these...

How to bulk load 120 or 220 film (using 65mm Kodak...

In June 2015 I was lucky enough to source a fresh 300ft short-end of Kodak's 250D (Vision 3 5207) motion picture stock in 65mm...

How-to: Build your own JOBO-style semi-automatic film processor: Pt.1

I have always wanted a Jobo film processor. For years the idea of having a temperature controlled water bath and a roller based agitation...

Developing motion picture film in your own darkroom by Mr. D...

Snatched from the streets of San Diego in late March 2016 by a group of masked assailants, Diz has been spending some time at EMULSIVE...

How-to: Build your own JOBO-style semi-automatic film processor: Pt.2

Welcome back to this guide on building your own JOBO-style automatic film processor. If you recall, in part 1 we build the water tank...

How to develop your own slide film with the Tetenal Colortec...

Congratulations, if you are reading this article then you are (hopefully!) willing to take the next step in your film development adventure. In this...

How to get started with pushing (and pulling) film

We've roped the very agreeable Michael Bitaxi into putting together a guest post for us covering everything you need to get started with pushing and...

Building a naked Aero Ektar Speed Graphic: The AEROgraphic project part...

Welcome back for part two of the naked Aero Ektar Speed Graphic project. What was once known as the AERO Peacemaker is now called...

How-to: Load a Paterson System 4 film development tank

Probably the most awkward aspect of developing films at home is getting your exposed film onto a reel and into a developing tank. It...

Building a naked Aero Ektar Speed Graphic: The AEROgraphic project part...

Welcome to the sixth and final part of the AEROgraphic project series. If you've been following along with your own build, by now you will...

An introduction to black and white darkroom printing

Black and white printing is (obviously) fun, and easy to get into. I hope this introduction will help those that haven’t yet taken the step,...

Building a naked Aero Ektar Speed Graphic: The AEROgraphic project part...

Welcome to part five - the penultimate part - of the AEROgraphic project. In this article you will finally be finishing your build. Rest...

Building a naked Aero Ektar Speed Graphic: The AEROgraphic project part...

Welcome to part three of the AEROgraphic Project! There's no time for preamble, as this is where things start to get really interesting (and fun)....

Building a naked Aero Ektar Speed Graphic: The AEROgraphic project part...

Welcome to the final stretch. If you've made it this far then you're very close to seeing your AEROgraphic project come together. By the...

How to: An introduction to wet plate collodion

You might remember that we featured an interview with Robert Marsters some months ago. I asked Robert to provide some background to the wet plate collodion...

How to make and experiment with homemade redscale film

This article covers making and experimenting with redscale film at home. I'll be walking you through the (very simple) steps you'll need to roll your...

An introduction to Luminograms with Michael Jackson

If you're a regular reader of EMULSIVE interviews, then you may remember our piece with Michael Jackson and his wonderful work at Poppit Sands back...

How to get started with solargraphy

Every year on the summer solstice, the sun is higher in the sky than at any other time in the year. From that point,...

How-to: creating a photo book, some do’s and don’ts – by...

Photographs become something special when printed. You can touch them, feel them, and get up close to them. And you can show them to...