EMULSIVE | Sep 26, 2018 | 8
TMAX Party: Best of March 2017
Welcome to the best of #TMAXParty March 2017 and apologies to everyone who has been waiting patiently for this shortlisting to be published.
As established by #FP4Party 2016, below you will find three short listed entries for each day of #TMAXParty’s post week. Entries were pulled from the 191 posted on Twitter between March 20th and 26th using the #TMAXParty hashtag.
We’ve provided a voting form at the foot of this page for you to cast your votes. Voting is open until Sunday April 23rd, at which point your votes will be collated and a winner announced.
Here we go.
DAY ONE – 20 March 2017
Grant Meyer – @grantmeyerphoto
So versatile, I think TMax 400 may be my new go to. Let the @TMAX_party #postweek begin! #TMAXParty #believeinfilm
Adi Taylor – @viewfinder_m6
Last one for tonight, Saltburn, @HassyXpan ii & 45mm, Tmax 100 in HC110 #TMAXParty
Alex Luyckx – @AlexLuyckxPhoto
Tossing in my hat with a couple images for the March @TMAX_party #believeinfilm #tmaxparty #largeformat #kodak
Day two – 21 March 2017
David S Allen – @DBloomsday
Finally! My 1st official #TMAXParty submission: “They came for us first.” TMAX 100 shot at EI400, dev’d direct positive. #believeinfilm
Tom Rayfield – @mr_rayfield
@TMAX_party #TMAXParty #PostWeek
Zheng Xu – @zxuphoto
HBO and the Grace Building, NYC – Kodak T-Max 400 #TMAXParty #filmisnotdead #istillshootfilm @EMULSIVEfilm @TMAX_party
Day three – 22 March 2017
Illusive Photography – @aantiporda
#TMAXParty @TMAX_party #californiapoppies #wildflowers #tmax400 #redfilter #mamiya645pro #antipordaphotography
Barnaby Nutt – @BarnabyNutt
‘So Emily, just how excited are you about the #TMAXParty?’
#believeinfilm #OlympusStylus120 @TMAX_party #kodak_photo
erik – @ClickErik
Inspired by @BarnabyNutt “Asha, what does daddy look like getting ready for #TMAXParty?” @TMAX_party TMY2, OM-2n, 50mm 1.8, pyrocat
Day four – 23 March 2017
Ashley B Williams – @Grumpyfck
A rare sight in plymouth TBH!
Bronica Etrs – TMax 100
@TMAX_party #TMAXParty #52cameras52weeks #believeinfilm
Sandeep – @Givemeabiscuit
#TMAXParty Day 4 pt2 @TMAX_party Tmax400, Yashica Mat 124G #believeinfilm London
Darren Rose – @winterrosephoto
You’d think they were sisters – Too bloody cute! So many good pictures so far on the #TMAXParty postweek
Day five – 24 March 2017
Richard Pickup – @richard_pickup
Abseiling, #Walsall Art Gallery, UK
Kodak TMAX 100 film
@TMAX_party @EMULSIVEfilm @BelieveInFilm
#TMAXParty #believeinfilm #photography
erik – @ClickErik
Oak Hill Oak. #TMAXParty #120film #kodak #TMY #pyrocat #believeinfilm #stveronica @TMAX_party @EMULSIVEfilm @KodakAlaris
Piotr Wesu – @piotr_wesu
University of mathematics Tmax 400 #tmaxparty @TMAX_party
Day six – 25 March 2017
Matias Takala – @elfsprite
Inside the #WWI ammo cave in #Vuosaari #Helsinki. #Hasselblad 500C/M & TMAX-400. #krepostsveaborg #TMAXParty @TMAX_party
erik – @ClickErik
Downtown. 2/3 From the rainy first day of shoot week. #TMAXParty #120film #TMY #Pyrocat #PVD
Ine – @mifilin
@TMAX_party @EMULSIVEfilm #tmaxparty #believeinfilm
Day seven – 26 March 2017
Pierluigi Tolu – @pierluigi_tolu
“The Last Ray of Sunlight” – My last, but not least, Day Seven contribute to #TMAXParty #postingweek #believeinfilm
Florian – @fjkraemer
Out of reach, at least without a trampoline for me
Olympus 35 UC Kodak T-MAX 400
#TMAXParty @TMAX_party #believeinfilm
Todd Reed – @Treed1961
#TMAXparty @TMAX_party @EMULSIVEfilm Dolores Mission, San Francisco with Tmax 400 @ 800 pushed 1 stop in Xtol 1:1
…and those are the 21 short listed photographs for what was #TMAXParty March 2017. Please be sure to let us know which one amongst all these is your favorite using the form below. If you would rather use an alternative method to submit your vote, please leave a note in the comments below!
It’s over to you…
Write for EMULSIVE
The driving force behind EMULSIVE is knowledge transfer, specifically creating more of it in the film photography community. You can help by contributing your thoughts, work and ideas to inspire others reading these pages.
Take action and help drive an open, collaborative community: all you need do is read this and then drop me a line.
Lend your support
Like what you see here? You can support EMULSIVE by helping to contribute to the community voice on this website (see above), or by heading on over to the EMULSIVE Patreon page and considering financial support from as little as $2 a month.
As if that’s not enough, there’s also an EMULSIVE print and apparel store over at Society 6, currently showcasing over two dozen t-shirt designs and over a dozen unique prints of photographs made by yours truly
In short, I want to continue building this platform and I’d love your help to make that happen.