Category: Experiments
-
Developing motion picture film in your own darkroom
Snatched from the streets of San Diego in late March 2016 by a group of masked assailants, Diz has been spending some time at EMULSIVE HQ (voluntarily) working on a guest post covering his process for developing motion picture film
-
How to bulk load 120 or 220 film (using 65mm Kodak 250D 5207)
In June 2015 I was lucky enough to source a fresh 300ft short-end of Kodak’s 250D (Vision 3 5207) motion picture stock in 65mm format.
-
How to get started with pushing (and pulling) film
We’ve roped the very agreeable Michael Bitaxi into putting together a guest post for us covering everything you need to get started with pushing and pulling film. It’s a great read for those of you who are thinking about dipping
-
Black and white film high EI shootout part 2: Kodak Tri-X 400, T-MAX 400 and ILFORD HP5 PLUS, Delta 400 at EI 25600
The high EI shootout is back for part two: the pushening. Poorly executed references to the terrible sequel that was Highlander 2 aside, I’m hoping that you’ll find this extension of part one just as informative as the first and
-
Black and white film high EI shootout part 1: Kodak Tri-X 400, T-MAX 400 and ILFORD HP5 PLUS, Delta 400 at EI 12800
A few months ago I wrote a post about experimenting with pushing Kodak Tri-X from ISO 800 to 12800.
-
Photoset #01: Kodak Ektar 100 – +1-stop push with +1 over development
As regular readers will know, I’ve been doing #FILMSWAPs for close to six months now and things are going great guns. Since it all started back in July, I’ve been lucky enough to swap over 150 rolls (and reels) of
-
Experimenting with Rollei Superpan 200 (with bonus infrared)
Today I’ve decided to give you all a look at the kind of results you can expect from Rollei’s Superpan 200 black and white film in 120 format.
-
Shooting Kodak Tri-X 400 from EI 800 to EI 12800 (+ development times)
Covering the results of experimenting with Kodak Tri-X 400, this article picks up from my original Kodak Tri-X 400 review and will show you single-stop pushes from EI 400 all the way up to EI 12800.