David Hume | Jul 10, 2018 | 6
5 Frames With… ILFORD HP5 PLUS (EI 1600 / 35mm / Chinon CE II Memotron) – by Oliver Grimm
So I got a new camera to play with—the Chinon CE II Memotron with quite a good lens. It was well past sunset so I thought about pushing a film I knew well enough anticipate the outcome. And I had a small project in mind: My beloved wife.
For sure, it wasn’t a piece of cake to talk my wife into that little photo series. Given the fact, that I’m fully aware of this transformation my wife faces most of the days, it’s still that time of the day she’s calling her very own time of tranquility. During that time I’m not even allowed nearby. After some efforts of persuasion she agreed to tolerate my camera even closer than 30 centimeters away from her face.
The pictures turned out quite well. I knew about the softness I would get with ILFORD HP5 PLUS pushed to 1600 — I developed in Kodak X-TOL which gives me nice grain I can tolerate, even love. As I shot with that lens fully open, some more softness showed up in the pics. The development of HP5 PLUS is as easy as it can get and it dries fully flat. Good for scanning.
~ Oliver Grimm
Get involved: submit your 5 Frames With
Getting your 5 frames featured couldn't be simpler: all you need to do is send over 5 frames shot on a single roll of film using the same lens and camera combination. Large format shooter, not a problem! As long as the shots all came from the same film stock, camera and lens, you're good to go.
Finally, don't forget that this series is being produced in conjunction with Hamish Gill's excellent 35mmc.com. Head on over to read the other half of these stories.
Write for EMULSIVE
The driving force behind EMULSIVE is knowledge transfer, specifically creating more of it in the film photography community. You can help by contributing your thoughts, work and ideas to inspire others reading these pages.
Take action and help drive an open, collaborative community: all you need do is read this and then drop me a line.
Lend your support
Like what you see here? You can support EMULSIVE by helping to contribute to the community voice on this website (see above), or by heading on over to the EMULSIVE Patreon page and considering financial support from as little as $2 a month.
As if that’s not enough, there’s also an EMULSIVE print and apparel store over at Society 6, currently showcasing over two dozen t-shirt designs and over a dozen unique prints of photographs made by yours truly
In short, I want to continue building this platform and I’d love your help to make that happen.