A few months ago, I started with analog photography. After a few weeks of using color rolls such as Fuji C200 or  Kodak ULTRA MAX 400, I decided to try black and white photography.

While living in Ho Chi Minh City, Vietnam, I had the opportunity to learn how to develop and scan my own rolls thanks to Noirfoto Darkroom. From then on, a new world opened to me. Back in France, I equipped myself to allow myself to develop and scan my negatives. Yet, I’m still looking for “the” film I want to shoot with. In exploring, I went to my local lab/shop and decided to buy a bunch of rolls I’d never tried before. I’d heard a lot about Kodak T-Max 400 but I wasn’t really convinced until I saw some shots of it pushed to EI 1600.

I’ve never push processed a film before so I thought I could try this on T-MAX 400 during a family trip along the French coast. It was pretty cloudy, yet sometimes some sunlight would shine through. For these 5 frames I used my Olympus OM-2n with a Zuiko 50mm f/1.8 Auto-S lens.

Back home, I processed it in D-76 stock. But the process didn’t go as planned and it was quite difficult to fix. Finally, a pink stain which looked like the anti-halo layer was still there on the top and bottom of the film. Maybe it was because of my new development spirals? I don’t know.

After a while, it was time to scan. I’m really pleased with the result of the push processing. The grain, even if pretty visible is still limited. The film kept some good details both in the darks and highlights. Moreover, I really love the contrasts of those five frames. The next step is to find an enlarger and to learn how to print!

~ Antoine



Get involved: submit your 5 Frames With

Getting your 5 frames featured couldn't be simpler: all you need to do is send over 5 frames shot on a single roll of film using the same lens and camera combination. Large format shooter, not a problem! As long as the shots all came from the same film stock, camera and lens, you're good to go.

You can submit your article using this form.

Finally, don't forget that this series is being produced in conjunction with Hamish Gill's excellent 35mmc.com. Head on over to read the other half of these stories.



Write for EMULSIVE

The driving force behind EMULSIVE is knowledge transfer, specifically creating more of it in the film photography community. You can help by contributing your thoughts, work and ideas to inspire others reading these pages.

Take action and help drive an open, collaborative community: all you need do is read this and then drop me a line.


Lend your support

Like what you see here? You can support EMULSIVE by helping to contribute to the community voice on this website (see above), or by heading on over to the EMULSIVE Patreon page and adding financial support from as little as $2 a month.

As if that’s not enough, there’s also an EMULSIVE print and apparel store over at Society 6, currently showcasing over two dozen t-shirt designs and over a dozen unique prints of photographs made by yours truly.


  1. Antoine, if you want to get rid of the anti-halation layer, just pre-wash for 1 minute in plain water. When you empty the water from the tank prior to adding the devoper, you’ll will notice the water is very purply-pink. When I processed my own films, I always did this step

Add your voice

This site uses Akismet to reduce spam. Learn how your comment data is processed.